PriceList for Gloves Rubber Coated - Red Nylon Mechanics Exfoliating Anti Slip Black Latex Coated Crinkle Work Construction Glove – Red Sunshine

Crinkle foam latex coating for high breathability and keeps hands cool and dry

Polyester seamless liner provides hands maximum comfort

Process the paper

The rubber is first sliced by the rubber mixer, sliced and then sent to the sol cylinder and gasoline mixed sol.The sol is then emulsified and modulated by pumping the emulsion tunpot.The rubber solution dissolved in gasoline is sent from the top of the distillation column, and is heated by steam distillation. The light component gasoline is heated into gas phase, and the gasoline gas is mixed and cooled by cold water in the oil and gas cooler.The mixture of oil and water goes to the oil and water separator and the oil and water are stratified.The upper gasoline is recovered, and the lower water is sent to the cold water tower by a water pump for cooling, and then the gas gasoline in the distillation tower is cooled after cooling;After mixing and modulation, the latex from the distillation column kettle is sent to the latex stirring tank under its own pressure, and then separated into the centrifuge to separate the raw latex from the gloves, and then it is ready for use after color blending and filtration.

The glove model was first cleaned by acid and alkali, and then washed by water. The cleaned model was first immersed in hot water and heated until it was soaked with coagulant and dried for dipping.After dipping, it is sent to the oven for preliminary drying, adding fiber inner jacket, flushing hot water and then sent to the oven for curing and drying.After demudding, gloves are checked for air filling, set at low temperature, dried at medium temperature, washed, dehydrated and dried, and then packaged and sent to the finished product warehouse.